PZD Series pumps offer higher capacities. These models feature an extra large keyboard and the injection rate can be entered directly in milliliters per minute.

The injection rate can be set three ways by direct entry of:

• Stroke speed: 1 to 300 spm
• Percentage: 1 to 100%
• Injection rate: ml/min.

PZiG Models offer capacities typically requiring motor driven pumps. Special models easily handle viscosities of 1000 CPS (up to 4000 CPS at reduced volume).
Powerful onboard controls allow proportional flow rate, pH and residual chlorine control by direct analog connection eliminating the PID Controller and Inverter (plus the control panel to house them), that are required by similar sized motor driven pumps.
The injection rate can be set three ways by direct entry of:

• Stroke speed: 1 to 300 spm
• Percentage: 1 to 100%
• Injection rate: ml/min.

For additional information, and choosing the correct pump for your application, please review the
Product Specifications Sheet.

If you have any questions or need assistance in selecting the correct pump for your application, please don't hesitate to contact EnviroAqua at (818) 890-3200.