CW4080-MO Cooling Water Treatment is a unique blend of organic scale and corrosion inhibitors and polymeric dispersants.  It is designed to replace metallic based corrosion inhibitor formulations where environmental restrictions prevent their use. CW4080-MO contains an organic sequestrant, which will prevent the formation of scale on heat transfer surfaces.  It also contains a polymeric dispersant for the prevention of fouling and the dispersion of suspended solids. CW4080-MO contains low level molybdate for ease of testing of dosages.  Corrosion of both ferrous and copper alloys is controlled by a combination of organic corrosion inhibitors.

APPLICATION

CW4080-MO is intended for use in industrial open cooling water systems.  It can be used in an alkaline treatment program or in conjunction with acid for pH control.  This product is particularly recommended for use in systems having very high heat transfer rates and high operating temperatures.

PHYSICAL PROPERTIES

Color & Form: Clear amber liquid

Specific Gravity: 1.053

Product pH: 2.14

Density: 8.779 lbs./gal.

Odor: Slightly aromatic

DOSAGE & FEEDING

CW4080-MO is best fed by a makeup meter impulsed chemical feed system designed to feed the treatment in proportion to makeup flow.

CW4080-MO should be maintained at the recommended treatment level at all times to insure continuous protection.

For best results, feed CW4080-MO directly from the shipping container.  If necessary, it can be diluted in a chemical feed tank using low hardness water.

Your technical representative will recommend the proper feed rate and treatment dosage based on system operating parameters.

HANDLING & PRECAUTIONS

This product is irritating to eyes and skin. Do not get in eyes, on skin, or clothing.  As with all chemicals, this product should be handled with care.

PACKAGING

CW4080-MO is packaged in a five-gallon pail, weighing 40 lbs.

For additional information please review the  Product Data Sheet.

For chemical safety, please refer to the   Material Safety Data Sheet.