Product Description
Features:
- Spring loaded check in QC models; no check in QB models
- High pressure to 3,000 psi
- Available in PVC, Kynar, 316 stainless steel and Carpenter 20
- Material of spring is HAST C for all quills
Recommendations:
- For lines smaller than 4" diameter, trim quill so chemical is released near center of line. Use as is for lines over 4" diameter.
- Install with “Telltale” V-notch facing upstream so flow strikes angled face at end of quill for most rapid dispersal of injected chemical.
- For maintenance ease, installation of an isolation valve, rated above line operating pressure, immediately b behind the quill is recommended.
For additional information, and choosing the correct quill for your application, please review
the 
Product Cut Sheet and 
Product Manual.
If you have any questions or need assistance in selecting the correct tank for your application,
please don't hesitate to contact EnviroAqua at (818) 890-3200.
Additional Information
| Manufacturer | Neptune |
|---|